Categories

Imet BS 400 GH Autocut Bandsaw

Two way mitre bandsaw with Autocut 3 way gravity feed
Swing head two way easy mitre
Positive mitre locations at 0-45-60deg
Quick action manual vice
Gravity feed automatic cutting with 3 way control
Electric flood coolant system
Carbide blade guides & blade cleaning brush
Variable downfeed control
2 year parts / 1 year labour warranty
Blade Inclination at end of cut
Rotating Cutting Table
AMP meter showing blade condition
Machine status indicator monitoring

Imet BS 400 GH Autocut

The ultimate workhorse autocut bandsaw noted for extreme performance and reliability, with rotating cutting table, mitre cutting from 0° to 60° right and from 0° to 45° left. Positive stops at 0°, 45°, 60°. Ideal and highly recommended for the demanding workshop and production situations. The unique below centre pivot means the bandsaw blade is inclined at the end of cut for optimum performance and blade life on square sections and flat plate materials whilst reducing stress and load on the machine components.

Cutting capacity at 0 ° Round: 310mm
Square: 280mm
Rectangular 400x250mm
Cutting capacity at 45 ° left Round: 280mm
Square: 270mm
Rectangular 300x220mm
Cutting capacity at 45 ° right Round: 280mm
Square: 270mm
Rectangular 300x220mm
Cutting capacity at 60 ° left Round: 215mm
Square: 200mm
Rectangular 200x200mm
Cutting capacity at 0 ° for full (C45)) 250mm
Blade motor 1.5/2.2 KW
Blade motor with ESC speed inverter ESC 2.2 KW
bandsaw blade Blade speed 37-74 m/min
Blade speed with ESC speed inverter ESC 18-110 m/min
Bandsaw Blade Blade size 4020x34x1.1mm
Height of the work surface 940mm
Weight 637kg
Dimensions 1530x1787x2240mm

Find out more about Imet Sawshttps://www.imetsaws.com/en/company

Imet Inverter

Electronic variable speed control (18-100 mpm)

Addimist Bandsaw

Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.

Battery Laser Line

Premium quality battery powered laser line. Can be fitted to most bandsaws and some circular saws. Excellent battery life and adjustable projection line.

Powered Laser Line

Imet factory fit.

End of Cut Inclination

This is a massive benefit when cutting square section and flat plate and should not be under estimated. This design ensures the blade always has a line of least resistance through these materials, reducing cycle times – dramatically increasing blade life and reducing load on the machine components.

Cutting Control

Amp meter to indicate power draw illustrating potential blade ware or over feeding. LED indicators for machine status.

Cutting Table

BS 400 GH is equipped with a wide rotating table of 460 mm diameter, mounted on a thrust ring with pre-loaded thrust bearing for easy rotation. The vice can be positioned either side of the sawblade depending on the mitre direction.

Saw Frame

The bow of BS 400GH is manufactured in heavy cast iron with large band wheels 300mm diameter to reduce blade material stress. The tension of the band is 1700kg / cm2 for maximum precision and performance with front adjustment and control microswitch. The blade guard is hinged to facilitate the blade replacement .

Blade Cleaning Brush

Powered blade cleaning brush to enhance blade life and performance.

Blade guide system

Very important to get this right in any bandsaw, heavy steel guide arms support a precision set of pre-twist roller bearings and solid carbide blade guides to give maximum precision and performance.

Auto-Cut function

3 mode selection – Manual movement with blade function disabled for fast approach to material, ideal when cutting to marked material line  – Operator setting of the start position with auto-cut function and blade stop at end of cut for unattended cutting.

34mm Blade

BS400 uses a blade 34mm to optimize cutting performances and cycle times: with this blade and its motor reducer the machine has perfect material penetration even on bigger profiles (and solid materials up to 250mm with C45 steels)

RAB40S

Connecting element for roller table for the unloading side.

RTSPRW40 Roller Table

Loading / unloading roller table. 1st element length 2m, capacity 700kg.

RTSSEW40 2000mm extension table available

RTMPRW40 Manual Measuring Table

Unloading roller table with metric rod, measurement feedback. 1st element, length 2mt , capacity 700kg

RTMSEW40 2000mm extension table available

RTD2LW40 Manual Digital Measuring Table

2000mm Manual positioning with handwheel and digital display of the cutting length. Pneumatic locking on position and 50mm retraction to allow easy unloading of the cut piece.

Optional lengths:-

RTD4LW40 4000mm
RTD6LW40 6000mm

RTP3W40 NC Measuring Table

3000mm NC servo drive measuring table. 5.7″ Touch screen HMI for cutting data input. Up to 20 different cutting lengths. Automatic 50mm retreat function to allow easy unloading of the cut piece.

Optional lengths:-

RTP6W40 6000mm

R1-W30 Vertical Rollers

Pair of containment vertical rollers 300 mm, made in steel max 2 pairs for each element 2m long, to use without rollers cover (only for RTS )

Addison Roller Table

3000mm available as plain support table or with manual measuring stop and metric scale. Modules can be joined for longer lengths.

Related Products

Recently Viewed Products

You have not viewed any product yet!