Tronzadoras GAA 500-90 - Addison Saws

Categories

Tronzadoras GAA 500-90

Automatic shuttle vice saw for 90° cuts 500mm sawblade
Manual setting of the cut length with micrometer
Digital setting of the number of pieces to be cut
Option for TR12 integrated drilling unit
Material out detection
Cutting length tollerance = +/- 0.1mm
Max feeder stroke 300mm with double index 600mm
Blade stroke limiter for fast repetition cutting
Option for 1000mm feeder
Hydropneumatic feeding of the sawblade
Precise control of the cutting feed rate
Enclosed cutting zone with interlocked hood
Secure horizontal & vertical pneumatic clamping
Preperation for swarf extraction

Tronzadoras MG GAA 500-90

Automatic saw with pneumatic feeder for repetition 90deg cutting of non-ferrous metals. This competitively priced compact machine has been very well proven, and delivers consistent reliable performance. The 300mm feeder has a double index function as standard to cut up to 600mm. There is also an option for 9 times indexing if required. The machine can be configured during production with vertical and horizontal drilling/punching heads to produce simple finished components.

Specification:
Technical GAA-500-90
Capacity 90° Round 150 mm
Square 150 x 150 mm
Rectangle 250 x 75 mm
Motor 4,0 HP
Blade Diameter  Ø 500 mm
Blade Speed 3000 RPM
Blade Axis Diameter 50 mm
Maximum Cutting Height 170 mm
Feeder Advance Range 500 mm (Double Advance)
Pneumatic Clamps 6 (3 Horiz + 3 Vert)
Weight 450 kg
Dimensions 1950 x 1050 x 970 mm
Cutting Chart:

Drilling/Punching Heads

Available as a factory order the GAA range can be fitted with TR12 or TR20 drilling heads or bespoke punching heads to produce completed components. It is possible to mount these vertically and horizontally and on the pneumatic GAA versions there is some manual adjustment for altering the centre lines, but essentially they are mounted to produce a conceived product. The GAA-CNC versions can have these units with Y axis nc movement offering a very flexible manufacturing option.

Addimist Bandsaw

Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.

9 Times Indexing

9 times length indexing in place of standard 2 times for automatic cutting of longer lengths.

Pneumatic Extended Feeder

Factory option to have extended feeder stroke of either 500mm or 1000mm, this can be used in conjunction with the multiple index for very long lengths.

Auto START/STOP of Vacuum

Blade Speed Inverter

PERTINAX Layer Protection

Ask for more information regarding this option.

Motor Upgrade

  • Motor 7,3 HP (5,5kW)

  • Motor 10 HP (7,5kW)

0-9 strokes

Saw Blade Included

Ø 500 mm  TCT blade included in the machine

5,3 HP (4kW) Motor

500 mm oleo-pneumatic feeder

Twin stroke (500 + 500 mm)

Pneumatic Clamping Cylinders

  • 2x pneumatic vertical  clamping cylinders

  • 2x pneumatic horizontal clamping cylinders

Twin pressure system for clamping security

LOW/HIGH

Cutting advance adjustable

Adjustable feeding speed

Pneumatic lubrification

Automatic OPEN/CLOSE hood

LED lighting

Lack of material sensor

Polycarbonate shield

Additrack 3MS

Roller support table with manual set material stop and graduated scale. 3000mm long with 280mm wide rollers (100kg point loading) available with steel rollers and neoprene coated rollers for aluminium and materials with a sensitive surface finish. Adjustable support legs are available together with connection brackets. The modules can be joined for longer lengths.

Recently Viewed Products

You have not viewed any product yet!