Categories

Imet H601 Semi-Automatic Band Saw

Twin pillar design with one way swing head
6° Inclined blade for optimum cutting
Right hand mitre to 60°
Saw bow supported on precision linear rails
Variable blade speed with inverter
34mm wide blade for high cutting rates
Hydraulic main vice
Material height sensor & rapid approach
Manual blade tension with micro-switch
Removable swarf collection tray
2 Year parts warranty (1 year on site labour)
Blade breakage detection with auto-stop
41mm sawblade width

Imet H601 Semi-Automatic Band Saw

Hydraulically driven twin column, the H601 semi-automatic bandsaw is specially adapted with an inclined sawblade to give maximum performance in square section material, increase sawblade life, reduce cutting times, offer larger scope for each tooth pitch (less blade changes) and significant reduction in load on the machine components.

Cutting capacity at 90° Round: 510mm
Square: 450mm
Rectangular: 610x440mm
Cutting capacity at 45° Round: 440mm
Square: 440mm
Rectangular: 440x450mm
Cutting capacity at 60° Round: 260mm
Square: 260mm
Rectangular: 250x450mm
Cutting capacity at 90° with bundle Max 600x250mm
Min 150x50mm
Cutting capacity at 90° solid (C45) 280mm (350mm with 41mm blade and 4KW motored.)
Band Saw Blade size 5320x34x1.1mm
Maximum opening of the vice 620mm
Band Saw Blade inclination
Blade motor 3Kw
Blade speed 15÷110
Working plate height 820mm
Hydraulic unit tank capacity 20l
Coolant tank capacity 60l
Machine size 1500x2850x2170mm
Weight 1700kg

Find out more about Imet Saws

 

Battery Laser Line

Premium quality German battery powered laser line. Addison fit item.

Bundle Cutting Device-52

Hydraulic bundle cutting device for H 601 semi-automatic band saw. Maximum cutting capacity is 600x250mm, minimum 150x60mm

Addimist Bandsaw

Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.

Powered Laser Line

Imet factory fit wired laser line.

Performance Upgrade

It’s possible to improve machine and cutting performances applying the 4KW supplementary motor reducer for 41mm blade and hydraulic tensioning.

Cutting Angle Display

It’s available as a optional the LCD display to view the set cutting angle.

Cutting Table

The H601 semi-automatic band saw is intentionally produced with a large cutting table to fully support wide section material.

Mitre Accuracy

A very large graduated sector plate is deployed for maximum angle precision. A digital display is available as an option.

Saw Frame

H 601 has a heavy rigid steel saw frame for maximum stability and vibration absorption. Mounted on a large steel column with precision linear guides. To increase the cutting performance, the bandsaw has a very high blade tension (2000kg/cm2).

6° blade inclination

The 6° blade inclination has considerable benefits when cutting square and flat material. With sectional material the line of least resistance is followed through the entire cut. With solid the initial contact is not across the entire width. All of these benefits add up to extended blade life faster cutting times and less stress on the machine components.

Material detection device

Mechanical material height detection device, fast approach to the material then the device switches to the selected feed speed for cutting and then returns automatically to 5mm above the workpiece for fast repetition cutting.

End-cut point

The machine is equipped with a control micro-switch on the mobile blade guide for the automatic detection of the end-cut point.

Horizontal supporting roll

The machine has a supplementary support roll placed on the loading side for a better support to the material even on bigger sizes.

Vice

A short stroke hydraulic vice is fitted. This method is safer than full stroke designs, and eliminates the chance of damaging the exposed piston shaft. The gap adjustment is by handwheel on lead screw.

Cutting Control

Mobile control panel to set all of the cutting parameters including LED machine diagnostic indicators.

Variable blade speed

The machine is equipped with ESC, electronic inverter for variable speed so that it’s suitable to cut different materials.

Connection element for unloading side (Optional)

Connection element between roller table and machine for unloading side.

Loading/unloading roller table (Optional)

Roller table compatible with both loading and unloading table with 1 leg, maximum capacity 1500kg, length 1.5m

Digital reading roller table (Optional)

Unloading roller table with digital reading and manual positioning. Available: -3m RTL3KS600 -6m RTL6KS600 -9m RTL9KS600

Motorized length stop roller table (Optional)

Roller table with motorized length stop and lengths selection through the keyboard. Available: -3m: RTP3KS600 -6m: RTP6KS600 -9m: RTP9KS600

Motorized roller table for loading side (Optional)

Loading motorized roller table with chain transmission and motor reducer managed by inverter with keyboard. -3m; capacity 3000kg, RTR3KS600C -6m; capacity 6000kg, RTR6KS600C -9m; capacity 9000kg, RTR9KS600C -12m; capacity 12000kg,RTR12KS600C

Motorized roller table unloading side (Optional)

Unloading motorized roller table with chain transmission and motor reducer managed by inverter with keyboard. -3m; capacity 3000kg, RTR3KS600S -6m; capacity 6000kg, RTR6KS600S -9m; capacity 9000kg, RTR9KS600S -12m; capacity 12000kg,RTR12KS600S
Excluding measuring stop.

Digital reading length stop with manual positioning (Optional)

Digital reading length stop with manual positioning. automatic slowdown sensors available only with RTR. -3m: RL3S -6m: RL6S -9m: RL9S -12m: RL12S

CNC motorized measurement (Optional)

CNC motorized measurement with fast approaching for automatic slowdown of the piece (only with RTR). -RR6S, measurement length 6m -RR9S, measurement length 9m -RR12S. measurement length 12m

Pair of vertical rollers (Optional)

Pair of vertical containment rollers in steel, max 2 pair every 1.5m.

Vertical roller (Optional)

Single vertical roller with 250mm to prevent falls while moving the pierce. Max 2 each 1.5m.

Related Products

Recently Viewed Products

You have not viewed any product yet!