Categories

Imet Sirio 370 AF-E Automatic Circular Saw

Automatic cold saw with pneumatic material feeder
520mm stroke pneumatic feeder multi-index
Hydro-pneumatic head feed = precise control
Digital setting of head stroke = fast cycles
Right hand mitre cuts to 60° (manual)
Piece counter-Cycle timer-Power meter
Reverse mode to free jammed blades
Removable swarf collection drawer
Pneumatic vice
Anti-burr offcut vice (90° cuts only)
Electric Flood coolant system

Imet Sirio 370 AF-E circular cold saw

Automatic circular saw / cold saw with pneumatic material feeder for repetition cutting of solid and sectional materials. The cut length is manually set using a micrometre and the number of pieces is set on the machine control panel. See the features list for more information on the benefits of this automatic circular saw from IMET.

Cutting capacity at 0° Round: 120mm
Square: 100mm
Rectangular 180x100mm
Cutting capacity at 45° left Round: 120mm
Square: 100mm
Rectangular 130x100mm
Cutting capacity at 45° right Round: 105mm
Square: 100mm
Rectangular 130x100mm
Cutting capacity at 60° left Round: 110mm
Square: 90mm
Rectangular 90x100mm
Cutting capacity at 0° (for solids) 40mm
Blade size D: 370mm
hole: 40mm
Blade speed 15/30 rpm
Double blade speed 30/60 rpm
Blade speed with ESC inverter 15/70 rpm
Blade speed x2 with ESC inverter 30/140 rpm
Blade motor power 1.5/2.2 KW
Feeder lenght 520mm
Min. cut in automatic cycle 15mm
Min. diam. cutted in section 5mm
Scrap-end 170mm
Working table height 925mm
Dimensions 1900x1450x2100mm
Weight 710kg

Find out more about Imet Saws

V Jaw Clamp

Two pairs of cast iron V jaws to fittings bundles and round bars (max diameter 85 mm.) with tools to mount them

Addimist

Addimist pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.

Inverter

Inverter speed inverter to expand the range of materials compatible with SIRIO AF-E. It’s possible also request the speed doubled both with and without the speed inverter The standard speed is 15/30 rpm; using the ESC inverter the speed is 15/70 rpm. You can also apply the device for double speed: in this case the speed will be 30/60 rpm and 30/140 rpm with the inverter.

Related Products

Recently Viewed Products

You have not viewed any product yet!