LS150-4D Fibre Laser Cutting Machine

LS150-4D Fibre Laser Cutting Machine -Tube

High speed manually loaded tube cutting and profiling fibre laser machine with the ability to work round-square-rectangular-elliptical-flat & oval tube without tooling changes. This machine by comparison is very economically priced and opens the door to producers that are using slower and less precise production methods.

Specification	Unit	LS208-4	LS150-4
max raw tube loading length	mm	6000	6000
min material waste length	mm	140	45
X-axis working distance/laser head plain motion	mm	220	200
X-axis speed	mm/sec	500	500
Y-axis working distance/carriage feeding	mm	6600	6700
Y-axis speed	mm/sec	834	777
Z-axis working distance/laser head upright motion	mm	150	110
Z-axis speed	mm/sec	500	500
B & B1-axis speed/front & rear chuck	degree/sec	375	450
max cutting capacity / OD	mm	20~208	20~150
positioning repeatability	mm	±0.03	±0.03
machine dimension (length x width x height)	mm	10500x1800x2400	11000x1800x2100
Laser generator		fibre	fibre
max laser power	(alternative)	1000W 1500W 2000W 3000W	1000W 1500W 2000W

Simple Unloading Table

3000mm unloading system with tilting table to eject tubes on to a small holding tray. The height of the table has to be manually adjusted relative to the tube diameter. This table can only be used with round tube. For square and other shapes the roller type must be used.

Roller Unloading Table

3000mm unloading table for square and rectangular tube. The rollers are powered to raise vertically and lower the finished piece to the sloped table, the pieces slide to the small receiving shelf.

Loading System

6000mm cross loading system for round, square, rectangular and some shaped tubes. There is a powered safety barrier covering the front side.

Laser

Efficient fibre laser with automatic calibration, axis servo drive at 500mm/sec speed with a tolerance of ±0.03 mm capable of processing :-
Round – Square – Rectangular – elliptical and oval tubes.
Choice of 1000w – 2000w – 3000w

Clamping

Universal 4 direction clamping system with servo drive and powered self-adjusting roller style clamping. Variable roller pressure allows clamping of thin wall materials.

Feeder

Material feeder with servo drive
Material holding chuck with servo drive and patented chuck system capable of holding circular, or rectangular / square/ elliptic / flat oval tube

Safety

Powered side screen and end structure

Control

Large TFT display with standard CYPCUT programming software.

More info on Cypcut

Categories